Laser innovation simplified.


  • About Us
  • Medical Laser Solutions
        • We Are Here For You

          Regardless of whether or not you have a service agreement, we are always willing to assist and get your lasers and other equipment up and running quickly and cost-effectively, wherever you are in Canada.

        • EMAIL US

        • CALL US

          Toll Free: 1-888-252-2219
          Local : 1-705-327-7993
        • VISIT US

          23 Progress Drive, Unit #6 Orillia, ON L3V 0T7

Laser Marking on Foils and Paints

Laser marking on foils has completely replaced screen-printing in several applications, especially in the production of pieces used in so-called “day & night” applications. In fact, using the laser, it is possible to have perfect control over the quantity of removed material and thus the depth of the laser marking as well as being able to perfectly define the size of engraved lines and improve definition in the corners. This results in enhanced appearance and, most of all, a significant increase in productivity.

Find out which Laser marker is right for you

Get in Touch

Get In touch


The laser beam penetrates the surface and removes a part of the top layer of the material, creating a depression in the area. This happens with the partial removal of coating layers from the foil or film that have a markedly different colour.


Laser cutting does not apply any pressure on the film or foil. The entire process is contactless and is faster than any other cutting system (such as plotter or blade). In addition, laser cutting is perfect when you need to work on multilayer films: you can use it to cut a number of layers (for example, support films, adhesive films and cover films) in one single step.

Day and Night Application

“Day & Night” laser marking on paints can be found wherever there is a need for illuminated plastic-covered electronics. This process is widely used in the automotive industry (for example for car switches and buttons) and consumer electronics. The laser selectively removes specific lacquer layers from multilayer-coated transparent parts until the correct or desired colour is exposed.